SL-Cxx00 Quick Install
Submitted by anunakin on Sat, 2006-09-23 20:50. SL-C1000/C3100 | Zaurus native

You need install new uBOOT for SL-Cxx00
- Remove battery
- Put SD with uBOOT install files
- Hold C+D and plug power
- Wait green and yellow lights turn off and remove power and SD/card

- Put a SD card with new pdaXrom install files
- Now Hold (OK) and plug power(without battery), wait about +/-20 seconds, the emergency system goes UP
- On question say "y" (YES)
- Now wait for install

- After finish, remove power, put battery
- Hold Power Buttom for 20 seconds +/- and pdaXrom goes start

Note:
if emergency system not loads try manual install see uBOOT README!


=====================================================================

U-BOOT/Emergency system installation and upgrade
Submitted by Sash on Fri, 2006-07-28 14:59.

Fresh installation on Zaurus with Sharp bootloader:
1) Unzip u-boot archive to CF or MMC/SD card, you will see next files: emergenc.img, u-boot.bin, updater.pro and updater.sh
2) Run new rom installation as usual from japanese menu
3) Press and hold OK during reboot - emergency system will boot up

Upgrade or update with low level updater:
1) Unzip u-boot files to FAT16 CF or MMC/SD card
2) Unplug power adapter, eject battery
3) Insert CF or MMC/SD card
4) Press and hold C+D buttons, and insert battery or plug in power adapter cable - green flash will light for ~20 sec and then off
5) Unplug power adapter or eject battery.
6) Press OK button and insert battery or plug in power adapter cable.
7) Emergency system will boot up

If you already have emergency system on your Zaurus (NOTE: first release of emergency system for C1000/3x00 can't updating by this way):
1) Unzip u-boot files to CF or SD/MMC card
2) Reboot in emergency system, insert card, and:
for CF card:
cd /mnt/cf
for MMC/SD:
cd /mnt/card
3) Flash new u-boot:
nandlogical /dev/mtd1 WRITE 0x0 0x20000 u-boot.bin
4) Flash new emergency image:
nandlogical /dev/mtd1 WRITE 0x60000 0x540000 emergenc.img
5) Reboot in new emergency system