|
|
| Zaurus 中文论坛 - 手持linux设备专用 |
 |
| View previous topic :: View next topic |
| Author |
Message |
lonelyp
Joined: 14 Nov 2006
Posts: 260
小企鹅: 8158
|
 Posted: 2007-Jan-21 Sun, am11:43 |
 |
| Post subject: Roku (Hermes II) CF wifi卡pdaxrom驱动问题，请高手帮忙，谢谢 |
|
i've got a cf wifi card
i think it is Hermes II based wifi card
i am using pdaxrom 1.1.0 beta 3 on my C3100
the card info is
| Code: |
# cardctl ident
product info: "Wireless", "CF NIC CFBAG", "", ""
manfid: 0x0156,0x0003
function: 6 (network)
|
by default , this card cannot work in pdaxrom
i copied the wlags49_h2 driver from cacko 123 (this card can work fine on my friend's zaurus with cacko, which kernel is also 2.4.20) into /lib/modules/2.4.20/kernel/drivers/net/wireless/
and i changed settings in /etc/pcmcia
i added
| Code: |
device "wlags49_h2_cs"
class "agere" module "wlags49_h2_cs"
device "wlags49_h25_cs"
class "agere" module "wlags49_h25_cs"
card "Agere Systems Hermes-II based PCMCIA Wireless Adapter"
manfid 0x0156, 0x0003
bind "wlags49_h2_cs"
card "Agere Systems Hermes-II.5 based PCMCIA Wireless Adapter"
manfid 0x0156, 0x0004
bind "wlags49_h25_cs"
|
and the content of file agere is
| Code: |
#!/bin/sh
#
export WIRELESS_USE=$0
./network $*
exit $?
|
after i reboot my zaurus,
the power LED of my wifi card lighted on.
but the card cannot work,
and if i input command "iwconfig"
the zaurus hang  ...
the log from dmesg is below:
| Code: |
s.o:>>>>:wl_insert
wlags49_h2_cs.o:wl_insert Calling hcf_connect()...
wlags49_h2_cs.o:wl_insert Calling wvlan_go() to perform a card reset...
wlags49_h2_cs.o:>>>>>:wl_go
wlags49_h2_cs.o:>>>>>>:wl_disable
wlags49_h2_cs.o:<<<<<<wl_disable>>>>>>:wl_disable_wds_ports
wlags49_h2_cs.o:<<<<<<wl_disable_wds_ports>>>>>>:wvlanGetPriRecords
wlags49_h2_cs.o:wvlanGetPriRecords PRI 31 variant 3 version 2.26 hcfStatus = 0
wlags49_h2_cs.o:wvlanGetPriRecords NIC 14 variant 1 version 0.04 hcfStatus = 0
wlags49_h2_cs.o:<<<<<<wvlanGetPriRecords>>>>>>:wl_put_ltv
wlags49_h2_cs.o:wl_put_ltv CFG_REG_MB : 0xc24c0c14
wlags49_h2_cs.o:wl_put_ltv CFG_REG_MB result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_MAX_DATA_LEN : 0x05e4
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_MAX_DATA_LEN result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_SYSTEM_SCALE : 0x0001
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_SYSTEM_SCALE result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_OWN_CHANNEL : 0x000a
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_OWN_CHANNEL result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_MICRO_WAVE : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_MICRO_WAVE result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_MCAST_RATE : 0x0002
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_MCAST_RATE result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_OWN_NAME : Linux
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_OWN_NAME result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_RTS_THRH : 0x092b
wlags49_h2_cs.o:wl_put_ltv CFG_RTS_THRH result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_PORT_TYPE : 0x0001
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_PORT_TYPE result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_TX_RATE_CNTL : 0x0003
wlags49_h2_cs.o:wl_put_ltv CFG_TX_RATE_CNTL result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_PM_ENABLED : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_PM_ENABLED result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_MCAST_RX : 0x0001
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_MCAST_RX result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_MAX_SLEEP_DURATION : 0x0064
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_MAX_SLEEP_DURATION result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CREATE_IBSS : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CREATE_IBSS result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_DESIRED_SSID : LinuxAP
wlags49_h2_cs.o:wl_put_ltv CFG_DESIRED_SSID result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_OWN_ATIM_WINDOW : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_OWN_ATIM_WINDOW result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_HOLDOVER_DURATION : 0x0064
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_HOLDOVER_DURATION result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_PROMISCUOUS_MODE : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_PROMISCUOUS_MODE result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_AUTHENTICATION : 0x0001
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_AUTHENTICATION result : 0x0000
wlags49_h2_cs.o:wl_put_ltv MAC Address : 00:10:C6:80:C0:6A
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_OWN_MAC_ADDR
wlags49_h2_cs.o:wl_put_ltv CFG_XXX_MAC_ADDR result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_OWN_SSID : LinuxAP
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_OWN_SSID result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_ENCRYPTION : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_CNF_ENCRYPTION result : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_SET_WPA_AUTH_KEY_MGMT_SUITE : 0x0000
wlags49_h2_cs.o:wl_put_ltv CFG_SET_WPA_AUTH_KEY_MGMT_SUITE result: 0x0000
wlags49_h2_cs.o:>>>>>>>:wl_set_wep_keys
wlags49_h2_cs.o:<<<<<<<:wl_set_wep_keys
wlags49_h2_cs.o:<<<<<<:wl_put_ltv
wlags49_h2_cs.o:<<<<<wl_go>>>>>:wl_init
wlags49_h2_cs.o:<<<<<wl_init>>>>>:wl_wds_netdev_register
wlags49_h2_cs.o:<<<<<:wl_wds_netdev_register
wlags49_h2_cs.o:wl_insert wlan0: Wireless, io_addr 0xf6000000, irq 135, mac_address 00:10:C6:80:C0:6A
wlags49_h2_cs.o:<<<<:wl_insert
wlags49_h2_cs.o:<<<:wl_adapter_insert
wlags49_h2_cs.o:<<:wl_adapter_event
wlags49_h2_cs.o:<wl_adapter_attach>:wl_ioctl
wlags49_h2_cs.o:>>:wl_wireless_ioctl
wlags49_h2_cs.o:wl_wireless_ioctl IOCTL: SIOCSIWMODE
wlags49_h2_cs.o:>>>:wireless_set_porttype
set porttype
wlags49_h2_cs.o:>>>>:wl_go
wlags49_h2_cs.o:>>>>>:wl_disable
wlags49_h2_cs.o:<<<<<wl_disable>>>>>:wl_disable_wds_ports
wlags49_h2_cs.o:<<<<<:wl_disable_wds_ports
wlags49_h2_cs.o:wl_go Downloading STA firmware...
Unable to handle kernel paging request at virtual address 0000c5bf
mm = c001a6c0 pgd = c23a4000
*pgd = a2624801, *pmd = a2624801, *pte = 00000000, *ppte = 00000000
Internal error: Oops: ffffffff
CPU: 0
pc : [<c5bf8ff0>] lr : [<000000c5>] Tainted: P
sp : c2651de0 ip : 0000c5bf fp : c2651e08
r10: c5bff2c0 r9 : c24c0118 r8 : 00000000
r7 : c5bff2fc r6 : c5bff33c r5 : c5bff2f0 r4 : 0000000e
r3 : 00000006 r2 : 00000000 r1 : 0000c5bf r0 : c24c0118
Flags: nzcv IRQs off FIQs on Mode SVC_32 Segment user
Control: 197F Table: A23A4000 DAC: 00000015 PID: 0
Process iwconfig (pid: 1068, stack limit = 0xc2650418)
Stack: (0xc2651de0 to 0xc2652000)
1de0: c24c02e8 c24c0118 c24c0000 00000000 c5bff170 c2651e90 00008b06 c2651e30
1e00: c2651e0c c5becfc8 c5bf8f20 c5bfc018 c5bfa1bc c24c0000 c2651f08 c5bff170
1e20: c2d14600 c2651e54 c2651e34 c5be4f58 c5bece8c c5bfa1bc 00000000 c24c0000
1e40: c2651f08 c5bff170 c2651e88 c2651e58 c5be28a4 c5be4e00 c5bf9774 00000001
1e60: c24c0118 00008b06 c2651f08 c24c0000 c2d14600 a0000013 c5bff170 c2651ebc
1e80: c2651e8c c5bf3910 c5be20c0 c5bfe434 00000000 c2651f08 00000000 00008b06
1ea0: c2651f08 c2650000 c2d14600 00000000 c2651f04 c2651ec0 c017e70c c5bf3758
1ec0: c2651ecc c0174ed4 c01e8f58 c2651f08 00000000 c2651ef0 c2651ee4 c2651f08
1ee0: 00000000 bffffcf4 00008b06 c2650000 c2650000 00000000 c2651f4c c2651f08
1f00: c0177898 c017df28 6e616c77 00000030 00000000 00000000 00000002 4001e0b0
1f20: 401eb378 bffffd1c 00008b06 bffffcf4 c25029a0 bffffcf4 ffffffe7 00000002
1f40: c2651f68 c2651f50 c01b0014 c01772c0 c024a374 00008b06 00000000 c2651f7c
1f60: c2651f6c c016e984 c01afc7c c2cdf9e0 c2651fa0 c2651f80 c0067494 c016e968
1f80: 00000002 00000001 0000f404 00000036 c001eb24 00000000 c2651fa4 c001e7c0
1fa0: c006729c 00000002 0000f404 00000000 00008b06 bffffcf4 00000000 00000002
1fc0: 00000001 0000f404 bffffe77 00000000 bffffd6c 00000002 0001765c 40190af0
1fe0: bffffa2c 0000adfc 40190af4 60000010 00000000 c2650000 00000000 00000000
Backtrace:
Function entered at [<c5bf8f14>] from [<c5becfc8>]
Function entered at [<c5bece80>] from [<c5be4f58>]
r8 = C2D14600 r7 = C5BFF170 r6 = C2651F08 r5 = C24C0000
r4 = C5BFA1BC
Function entered at [<c5be4df4>] from [<c5be28a4>]
r7 = C5BFF170 r6 = C2651F08 r5 = C24C0000 r4 = 00000000
Function entered at [<c5be20b4>] from [<c5bf3910>]
Function entered at [<c5bf374c>] from [<c017e70c>]
Function entered at [<c017df1c>] from [<c0177898>]
Function entered at [<c01772b4>] from [<c01b0014>]
Function entered at [<c01afc70>] from [<c016e984>]
r6 = 00000000 r5 = 00008B06 r4 = C024A374
Function entered at [<c016e95c>] from [<c0067494>]
r4 = C2CDF9E0
Function entered at [<c0067290>] from [<c001e7c0>]
r8 = C001EB24 r7 = 00000036 r6 = 0000F404 r5 = 00000001
r4 = 00000002
Code: e2855006 e1a00009 e1a0100c e1833402 (e5cc3000)
|
i think the problem is
Unable to handle kernel paging request at virtual address 0000c5bf
but i don't know how to solve it.
can anybody help me?
or tell me why the driver from cacko cannot work(the kernel version is same as pdaxrom 1.1b3...)?
==========================
Then I want to compile the driver by myself.
I've read this instruction:
http://wiki.splitbrain.org/wlan:orinocosilver
i've downloaded
pcmcia-cs-3.2.8.tar.gz
wl_lkm_722_abg.tar.gz
and kernel source of pdaxrom 1.1b3(C3100) from http://mail.pdaxrom.org/download/1.1.0beta...rom1_01.tar.bz2
BUT,
when i configure ,
the script cannot find "asm-armv5tel" in kernel source
i linked "asm" to "asm-arm"
then configured sucessful.
When i built it ,
it reported error and exit the make process.
| Code: |
............
/mnt/ide/opt/native/arm/3.4.6-xscale-softvfp/bin/../lib/gcc/armv5tel-cacko-linux/3.4.6/../../../../armv5tel-cacko-linux/include/asm/arch/hardware.h:22:28: asm/mach-types.h: No such file or directory
../hcf/fw_h2.c:4468: warning: missing braces around initializer
../hcf/fw_h2.c:4468: warning: (near initialization for `fw_image_infocompat[3].var_rec[0]')
make[1]: *** [wlags49_h2_cs.o] Error 1
make[1]: Leaving directory `/mnt/ide/home/root/working/pcmcia-cs-3.2.7/wireless'
make: *** [wlags49_h2_cs] Error 2
|
I am oppressed by a sense of failure ...
Can anybody help me ??
thanks anyway.
_________________
my Blog: http://wells.osall.com
请支持我的开源项目Sylvan: http://sylvan.osall.com |
|
| Back to top |
|
lonelyp
Joined: 14 Nov 2006
Posts: 260
小企鹅: 8158
|
|
| Back to top |
|
lonelyp
Joined: 14 Nov 2006
Posts: 260
小企鹅: 8158
|
| Posted: 2007-Jan-22 Mon, pm9:33 |
|
| Post subject: |
|
今天又重新编译了驱动
这回加载成功了
可是……
看附件吧
这卡我退货了,准备重新买一块CACKO和PDAXROM都支持的
再不退老板要不给退了……
希望CC有空研究一下吧
这卡是块好卡
据说功耗很低
| Description: |
|
Download |
| Filename: |
session.log.txt |
| Filesize: |
9.15 KB |
| Downloaded: |
47 Time(s) |
_________________
my Blog: http://wells.osall.com
请支持我的开源项目Sylvan: http://sylvan.osall.com |
|
| Back to top |
|
daniel_liu_gp
Joined: 30 Jan 2007
Posts: 48
小企鹅: 1368
|
| Posted: 2007-Mar-14 Wed, pm1:08 |
|
| Post subject: |
|
| 我也在用这个卡呢，不过只用CAKCO，因为Z机我只用来上网和看Excel等文件。
|
|
| Back to top |
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
|
 |
|
[ 页面生成时间: 秒 ] :: [ 次查询 ] :: [ ]
|
 |
Powered by phpBB © 2001, 2002 phpBB Group
iCGstation v1.0 Template By Ray © 2003, 2004 iOptional
|
 |
|
|
|
|
