Log inUsernamePassword
Log me on automatically each visit    
 Register
Register		 Log in to check your private messages
Log in to check your private messages
  Zaurus 中文论坛 - 手持linux设备专用
Zaurus 中文论坛 Forum Index » 硬件讨论

This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.
诚恳求教D-link DCF-660W无线网卡上网设置
View previous topic :: View next topic  
Author Message
mildbreeze



Joined: 31 Mar 2008
Posts: 5

小企鹅: 211
PostPosted: 2008-Mar-31 Mon, pm10:53 Reply with quote
 Post subject: 诚恳求教D-link DCF-660W无线网卡上网设置
买了个二手的无线网卡，指示灯闪烁，就是搜不到信号，放在无线路由旁边都不行。输入cardctl ident 显示 “d-link”，“cf-66w”，“”，就是没有802.11b之类的信息，怀疑这卡的质量。请问大家是怎么回事啊
Back to top
View user's profile Send private message
btest



Joined: 22 Nov 2007
Posts: 175

小企鹅: 4014
PostPosted: 2008-Apr-01 Tue, am7:12 Reply with quote
 Post subject:
先执行iwconfig看看，有没有找到无线网卡，例如：wlan0
如果有执行ifconfig wlan0 up，然后看看ifconfig wlan0，有没有自动分配到地址。
_________________
http://btest.blog.ubuntu.org.cn/
Back to top
View user's profile Send private message
mildbreeze



Joined: 31 Mar 2008
Posts: 5

小企鹅: 211
PostPosted: 2008-Apr-01 Tue, pm11:13 Reply with quote
 Post subject: 还是不行哎
btest wrote:
先执行iwconfig看看，有没有找到无线网卡，例如：wlan0
如果有执行ifconfig wlan0 up，然后看看ifconfig wlan0，有没有自动分配到地址。

输入iwconfig，eth0显示“no wireless extension”
输入cardctl ident，显示socket0：“dlink”，“dcf-660w”，“”
输入ifconfig -a ，显示
Link encap:Ethernet HWaddr 00:05:5D:FA:07:31
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:39

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

输入lsmod，显示
Module Size Used by
pxa_bi 21328 0 (unused)
net_fd 25024 0 (unused)
usbdcore 34544 0 [pxa_bi net_fd]
usbdmonitor 5248 0
prism2_cs 54576 0
p80211 9952 1 [prism2_cs]
sharp_mmcsd_m 25936 1
大侠再帮忙看看是咋回事吧？
Back to top
View user's profile Send private message
btest



Joined: 22 Nov 2007
Posts: 175

小企鹅: 4014
PostPosted: 2008-Apr-02 Wed, am7:07 Reply with quote
 Post subject:
好像驱动有问题，将插网卡后的dmesg发上来看看。
_________________
http://btest.blog.ubuntu.org.cn/
Back to top
View user's profile Send private message
mildbreeze



Joined: 31 Mar 2008
Posts: 5

小企鹅: 211
PostPosted: 2008-Apr-02 Wed, pm2:46 Reply with quote
 Post subject: 麻烦大侠了
btest wrote:
好像驱动有问题，将插网卡后的dmesg发上来看看。

bash-2.05$ dmesg
a_sd_wait_response: card removed (cmd=1Cool
pxa_sd_wait_id_response: card removed (cmd=1Cool
pxa_sd_wait_id_response: card removed (cmd=1Cool
VFS: Disk change detected on device mmcd(60,1)
pxa_sd_wait_response: card removed (cmd=1Cool
pxa_sd_wait_id_response: card removed (cmd=1Cool
pxa_sd_wait_id_response: card removed (cmd=1Cool
[SD]-clustsize = 4000
VFS: Disk change detected on device mmcd(60,1)
mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
mmcda: mmcda1
EXT2-fs: Unrecognized mount option noatimei
VFS: Disk change detected on device mmcd(60,1)
mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
mmcda: mmcda1
cramfs: wrong magic
VFS: Disk change detected on device mmcd(60,1)
mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
mmcda: mmcda1
VFS: Can't find a Minix or Minix V2 filesystem on device 3c:01.
VFS: Disk change detected on device mmcd(60,1)
mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
mmcda: mmcda1
MSDOS FS: IO charset utf8
VFS: Disk change detected on device mmcd(60,1)
VFS: busy inodes on changed media.
mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
VFS: busy inodes on changed media.
mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
VFS: busy inodes on changed media.
mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
VFS: busy inodes on changed media.
mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
VFS: busy inodes on changed media.
mmcda: mmcda1
pxa_sd_wait_response: card removed (cmd=13)
pxa_sd_wait_response: card removed (cmd=13)
pxa_sd_wait_id_response: card removed (cmd=13)
pxa_sd_wait_id_response: card removed (cmd=13)
pxa_sd_wait_response: card removed (cmd=13)
pxa_sd_wait_id_response: card removed (cmd=13)
pxa_sd_wait_id_response: card removed (cmd=13)
monitor_hotplug: agent: usbd interface: monitor action: suspend
udc_disable: ep0_urb already NULL
udc_disable: ep0_urb already NULL
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 exiting
monitor_pm_event: suspend finished (rc=0)
pxa_sd_wait_response: card removed (cmd=13)
sharp_sl_nand_suspend
FCS : CCCR = 161
sharp_sl_nand_resume
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
hotplug_schedule_bh: schedule bh
hotplug_bh:
monitor_connected: 1
monitor_restore: RESTORE_LOADED
monitor_hotplug: agent: usbd interface: monitor action: restore-loaded
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
hfa384x_corereset: hfa384x_corereset not supported on pcmcia. Use driver services COR access function instead
ident: nic h/w: id=0x800c 1.0.0
ident: pri f/w: id=0x15 1.0.7
ident: sta f/w: id=0x1f 1.3.6
MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=4/4
STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
Prism2 card SN: 99SA01000000
net_fd 0.1 035 2002-06-12 20:00 (dbg="",alwaysup=0,OUT=64,IN=64)
vendorID: 4dd productID: 9031
pxa_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
pxa_pcmcia_suspend(0)
monitor_hotplug: agent: usbd interface: monitor action: suspend
udc_disable: ep0_urb already NULL
udc_disable: ep0_urb already NULL
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 exiting
monitor_pm_event: suspend finished (rc=0)
pxa_sd_wait_response: card removed (cmd=00)
sharp_sl_nand_suspend
FCS : CCCR = 161
sharp_sl_nand_resume
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
[SD]-clustsize = 4000
hotplug_schedule_bh: schedule bh
hotplug_bh:
monitor_connected: 1
monitor_restore: RESTORE_LOADED
monitor_hotplug: agent: usbd interface: monitor action: restore-loaded
VFS: Disk change detected on device mmcd(60,1)
mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
mmcda: mmcda1
EXT2-fs: Unrecognized mount option noatimei
VFS: Disk change detected on device mmcd(60,1)
mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
mmcda: mmcda1
cramfs: wrong magic
VFS: Disk change detected on device mmcd(60,1)
mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
mmcda: mmcda1
VFS: Can't find a Minix or Minix V2 filesystem on device 3c:01.
VFS: Disk change detected on device mmcd(60,1)
mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
mmcda: mmcda1
MSDOS FS: IO charset utf8
VFS: Disk change detected on device mmcd(60,1)
VFS: busy inodes on changed media.
mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
VFS: busy inodes on changed media.
mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
VFS: busy inodes on changed media.
mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
VFS: busy inodes on changed media.
mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
VFS: busy inodes on changed media.
mmcda: mmcda1
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
hfa384x_corereset: hfa384x_corereset not supported on pcmcia. Use driver services COR access function instead
ident: nic h/w: id=0x800c 1.0.0
ident: pri f/w: id=0x15 1.0.7
ident: sta f/w: id=0x1f 1.3.6
MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=4/4
STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
Prism2 card SN: 99SA01000000
net_fd 0.1 035 2002-06-12 20:00 (dbg="",alwaysup=0,OUT=64,IN=64)
vendorID: 4dd productID: 9031
pxa_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
pxa_pcmcia_suspend(0)
prism2_cs.o: 0.1.12-shp Unloaded
p80211.o: 0.1.12-shp Unloaded
pxa_pcmcia_init(0)
monitor_hotplug: agent: usbd interface: monitor action: suspend
udc_disable: ep0_urb already NULL
udc_disable: ep0_urb already NULL
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 exiting
monitor_pm_event: suspend finished (rc=0)
pxa_sd_wait_response: responce time out (cmd=07 MMC_STAT=0x2142)
sharp_sl_nand_suspend
FCS : CCCR = 161
sharp_sl_nand_resume
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
[SD]-clustsize = 4000
hotplug_schedule_bh: schedule bh
hotplug_bh:
monitor_connected: 1
monitor_restore: RESTORE_LOADED
monitor_hotplug: agent: usbd interface: monitor action: restore-loaded
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
net_fd 0.1 035 2002-06-12 20:00 (dbg="",alwaysup=0,OUT=64,IN=64)
vendorID: 4dd productID: 9031
init_module: prism2_cs.o: 0.1.12-shp Loaded
init_module: dev_info is: prism2_cs
prism2_cs: index 0x01: Vcc 3.3, irq 39, io 0xf6000000-0xf600003f
pxa_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
hfa384x_corereset: hfa384x_corereset not supported on pcmcia. Use driver services COR access function instead
ident: nic h/w: id=0x800c 1.0.0
ident: pri f/w: id=0x15 1.0.7
ident: sta f/w: id=0x1f 1.3.6
MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=4/4
STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
Prism2 card SN: 99SA01000000
pxa_pcmcia_suspend(0)
Back to top
View user's profile Send private message
mildbreeze



Joined: 31 Mar 2008
Posts: 5

小企鹅: 211
PostPosted: 2008-Apr-02 Wed, pm2:47 Reply with quote
 Post subject:
听说这卡不用驱动的
Back to top
View user's profile Send private message
btest



Joined: 22 Nov 2007
Posts: 175

小企鹅: 4014
PostPosted: 2008-Apr-08 Tue, am8:19 Reply with quote
 Post subject:
驱动有问题。
_________________
http://btest.blog.ubuntu.org.cn/
Back to top
View user's profile Send private message
Display posts from previous:     
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    Zaurus 中文论坛 Forum Index » 硬件讨论 All times are GMT + 8 Hours
Page 1 of 1

 
Jump to:   
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum

[ 页面生成时间: 秒 ] :: [ 次查询 ] :: [ ]
Powered by phpBB © 2001, 2002 phpBB Group
iCGstation v1.0 Template By Ray © 2003, 2004 iOptional