Log inUsernamePassword
Log me on automatically each visit    
Register
Register
Log in to check your private messages
Log in to check your private messages
Zaurus 中文论坛 Forum Index » CACKO & SHARP/金峰 & OZ

This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.
易尚YWF-301型CF wifi,用于C1k,Sharp Rom和Cacko123
View previous topic :: View next topic  
Author Message
biphenyl



Joined: 18 Dec 2006
Posts: 23

小企鹅: 848

PostPosted: 2007-Jan-07 Sun, pm1:59 Reply with quote
 Post subject: 易尚YWF-301型CF wifi,用于C1k,Sharp Rom和Cacko123

结果:可以用于Sharp Rom,无需设置 !但cacko123里暂时无法使用,向高手求教中! (2007年1月7日晚22点在ccpaging的帮助下已搞定此卡在cacko中的正常使用)

外观:全新装盒未拆封,驱动盘和说明书。

背景: 北京网新易尚科技有限公司 出品 产品网页:http://www.yishang.com.cn/products/43detail.aspx

Sharp Rom识别信息:
命令:cardctl ident
Socket 0:
product info: " ", "IEEE 802.11 Wireless LAN/CF Card", "", ""
manfid: 0xd601, 0x0005
function: 6 (network)

lsmod显示信息:
卡装载后与卸载前lsmod显示多出的信息为:
Module Size Used by
p80211 18864 1 [prism2_cs]

dmesg命令显示结果:
pxa_pcmcia_init(0)
init_module: prism2_cs.o: 0.2.0 Loaded
init_module: dev_info is: prism2_cs
prism2_cs: index 0x01: Vcc 3.3, irq 135, io 0xf6000000-0xf600003f
pxa_pcmcia_suspend(0)
hfa384x_docmd_wait: hfa384x_cmd timeout(1), reg=0x8888.
hfa384x_drvr_start: Initialize command failed.
hfa384x_drvr_start: Failed, result=-110
prism2sta_ifstate: hfa384x_drvr_start() failed,result=-110
ident: nic h/w: id=0x800c 1.0.0
ident: pri f/w: id=0x15 1.0.7
ident: sta f/w: id=0x1f 1.3.6
MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=4/4
STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
Prism2 card SN: 99SA01000000
linkstatus=CONNECTED
ident: nic h/w: id=0x800c 1.0.0
ident: pri f/w: id=0x15 1.0.7
ident: sta f/w: id=0x1f 1.3.6
MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=4/4
STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
Prism2 card SN: 99SA01000000
linkstatus=CONNECTED

请各位Z机高手帮忙看看,看能否帮我搞定此CF wifi在cacko123下的使用!谢谢


Last edited by biphenyl on 2007-Jan-07 Sun, pm10:51; edited 2 times in total
Back to top
View user's profile Send private message
biphenyl



Joined: 18 Dec 2006
Posts: 23

小企鹅: 848

PostPosted: 2007-Jan-07 Sun, pm3:27 Reply with quote
 Post subject:

[size=18]在Cacko123下的实验:[/size]
将sharp rom的/etc/pcmcia下的wlan-ng.conf拷贝到cacko的同样目录下。

Cacko123识别信息:
命令:cardctl ident
Socket 0:
product info: " ", "IEEE 802.11 Wireless LAN/CF Card", "", ""
manfid: 0xd601, 0x0005
function: 6 (network)

lsmod显示信息:
插卡前后为多出任何不同的信息。

dmesg显示信息:
插卡前:
Linux version 2.4.20 (maslovsky@linux) (gcc version 2.95.3 20010315 (release)) #20 Mon, 31 Oct 2005 08:54:08 +0300
CPU: XScale-PXA270 revision 7
Machine: SHARP Akita
Converting old-style param struct to taglist
Ignoring unrecognised tag 0x00000000
Turbo Mode clock : 416.00MHz (*2.0, active)
Run Mode clock : 208.00MHz
System bus clock : 208.00MHz (1/1)
Memory clock : 208.00MHz (1/1)
LCD clock : 104.00MHz (1/2)
Security risk: creating user accessible mapping for 0x08000000 at 0xf1000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 mtdparts=sharpsl-nand:7168k@0k(smf),32768k@7168k(root),-(home) jffs2_orphaned_inodes=delete RTC_RESET=1 EQUIPMENT=0 LOGOLANG=1 DEFYEAR=2006 LOGO=1 LAUNCH=q
Console: colour dummy device 80x30
Calibrating delay loop... 415.33 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62156KB available (1978K code, 501K data, 136K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
RCSR = 4
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)
FCS : CCCR = 2000210
enable_irq(120) unbalanced from c000c7e0
batok installed
Starting kswapd
Journalled Block Device driver loaded
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
Squashfs 2.2 (released 2005/07/03) (C) 2002-2004, 2005 Phillip Lougher
Sharp SL-Series PXA fb driver initialized.
reset resolution unkown => 480x640
Console: switching to colour frame buffer device 80x30
fb0: SHARPSL_PXAFB frame buffer device
keyboard initilaized.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-0Cool with no serial options enabled
SharpSL serial driver version 5.05c (2001-07-0Cool with no serial options enabled
ttyS00 at 0xf8100000x (irq = 22) is a 16550A
ttyS01 at 0xf8700000x (irq = 20) is a 16550A, using IRDA
ttyS02 at 0xf8200000x (irq = 21) is a 16550A
rs_init: IRDA H/W initializaion
sharpled_init: done.
akita remote controller
Cotulla Real Time Clock driver v1.00
Cotulla Touch Screen driver initialized
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Spitz audio driver initialize
Sharp SL series flash device: 1000000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00140000-0x007f0000 : "Filesystem"
NAND device: Manufacture ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MB 3,3V)
Creating 3 MTD partitions on "NAND 128MB 3,3V":
0x00000000-0x00700000 : "smf"
0x00700000-0x02700000 : "root"
0x02700000-0x08000000 : "home"
Linux Kernel Card Services 3.1.31
options: [pm]
Intel PXA250/210 PCMCIA (CS release 3.1.31)
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
Backlight Driver Initialized.
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
IrCOMM protocol (Dag Brattli)
cramfs: wrong magic
FAT: bogus logical sector size 381
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 136K
Inode #5568 was a directory with children - removing those too...
Inode #5569 was a directory with children - removing those too...
Inode #5066 was a directory with children - removing those too...
Inode #5079 was a directory with children - removing those too...
Inode #5080 was a directory with children - removing those too...
Inode #5081 was a directory with children - removing those too...
bvdd: Registeration is a success.
bvdd: AREA VIRTUAL PHYSICAL SIZE
bvdd: BVDD : 0xc5979000 0xa2a00000 2097152
bvdd: PXAFB : 0xc3e00000 0xa3e00000 614400
bvdd: SRAM : 0xfe100000 0x5c001000 262144
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
SD Driver Initialized.
sharp_mmcsd 0.30 13 Oct 2004
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
Trying to free nonexistent resource <f6000000>
hda: SanDisk SDCFX-1024, ATA DISK drive
ide0 at 0xf6000000-0xf6000007,0xf600000e on irq 135
hda: 2001888 sectors (1025 MB) w/1KiB Cache, CHS=1986/16/63
Partition check:
hda: [PTBL] [993/32/63] hda1
ide_cs: hda: Vcc = 3.3, Vpp = 0.0
hda: hda1
hda: hda1
EXT3-fs: Unrecognized mount option quiet
hda: hda1
hda: hda1
EXT2-fs: Unrecognized mount option quiet
hda: hda1
hda: hda1
cramfs: wrong magic
hda: hda1
hda: hda1
VFS: Can't find a Minix or Minix V2 filesystem on device 03:01.
hda: hda1
hda: hda1
MSDOS FS: IO charset utf8
set_wakeup_src=ae000019->ae000019[9801a003]
usbh: udc_connected: ACTIVE_LOW: 0<7>usbh: monitor_connected: 0
usbh: monitor_unload: 0
usbh: monitor_hotplug: agent: usbh interface: monitor action: unload
usbh: monitor_request_irq: 41 71
usbh: monitor_modinit: finished
usbdm: usbd_monitor 0.3 035 2002-06-12 20:00
monitor_connected: 1
monitor_load:
monitor_hotplug: agent: usbd interface: monitor action: load
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
net_fd 0.1 035 2002-06-12 20:00 (dbg="",alwaysup=0,OUT=64,IN=64)
vendorID: 4dd productID: 9031
usbh: udc_connected: ACTIVE_LOW: 0<7>usbh: monitor_connected: 0
usbh: monitor_unload: 4
pxa27x_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
udc_connect: usb-device is not active.
monitor_modinit: finished
jffs2_do_read_inode(): No data nodes found for ino #5464
jffs2_do_read_inode(): But it has children so we fake some modes for it
pxa_sd_wait_response: responce time out (cmd=52 MMC_STAT=0x2142)
pxa_sd_wait_response: responce time out (cmd=05 MMC_STAT=0x2142)
[SD]-clustsize = 10000
mmcda: mmcda1
mmcda: mmcda1
EXT3-fs: Unrecognized mount option quiet
mmcda: mmcda1
mmcda: mmcda1
EXT2-fs: Unrecognized mount option quiet
mmcda: mmcda1
mmcda: mmcda1
cramfs: wrong magic
mmcda: mmcda1
mmcda: mmcda1
VFS: Can't find a Minix or Minix V2 filesystem on device 3c:01.
mmcda: mmcda1
mmcda: mmcda1
MSDOS FS: IO charset utf8

插卡后:
out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
SD Driver Initialized.
sharp_mmcsd 0.30 13 Oct 2004
pxa_sd_wait_response: responce time out (cmd=52 MMC_STAT=0x2142)
pxa_sd_wait_response: responce time out (cmd=05 MMC_STAT=0x2142)
[SD]-clustsize = 10000
Partition check:
mmcda: mmcda1
mmcda: mmcda1
EXT3-fs: Unrecognized mount option quiet
mmcda: mmcda1
mmcda: mmcda1
EXT2-fs: Unrecognized mount option quiet
mmcda: mmcda1
mmcda: mmcda1
cramfs: wrong magic
mmcda: mmcda1
mmcda: mmcda1
VFS: Can't find a Minix or Minix V2 filesystem on device 3c:01.
mmcda: mmcda1
mmcda: mmcda1
MSDOS FS: IO charset utf8
set_wakeup_src=ae000019->ae000019[9801a003]
usbh: udc_connected: ACTIVE_LOW: 0<7>usbh: monitor_connected: 0
usbh: monitor_unload: 0
usbh: monitor_hotplug: agent: usbh interface: monitor action: unload
usbh: monitor_request_irq: 41 71
usbh: monitor_modinit: finished
usbdm: usbd_monitor 0.3 035 2002-06-12 20:00
monitor_connected: 1
monitor_load:
monitor_hotplug: agent: usbd interface: monitor action: load
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
net_fd 0.1 035 2002-06-12 20:00 (dbg="",alwaysup=0,OUT=64,IN=64)
vendorID: 4dd productID: 9031
pxa27x_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
udc_connect: usb-device is not active.
usbh: udc_connected: ACTIVE_LOW: 0<7>usbh: monitor_connected: 0
usbh: monitor_unload: 4
monitor_modinit: finished
Back to top
View user's profile Send private message
biphenyl



Joined: 18 Dec 2006
Posts: 23

小企鹅: 848

PostPosted: 2007-Jan-07 Sun, pm3:46 Reply with quote
 Post subject:

把从sharp rom里拷贝出来的prism2_cs.o复制到/home/root/modules/2.4.20/pcmcia下,重启机器,还是不能联网。lsmod命令还是没有多出任何东西。
Back to top
View user's profile Send private message
biphenyl



Joined: 18 Dec 2006
Posts: 23

小企鹅: 848

PostPosted: 2007-Jan-07 Sun, pm7:57 Reply with quote
 Post subject:

sharp rom里/etc/pcmcia下的wlan-ng.conf文件


wlan-ng.rar
 Description:
wlan-ng.conf

Download
 Filename:  wlan-ng.rar
 Filesize:  1.33 KB
 Downloaded:  64 Time(s)

Back to top
View user's profile Send private message
biphenyl



Joined: 18 Dec 2006
Posts: 23

小企鹅: 848

PostPosted: 2007-Jan-07 Sun, pm9:45 Reply with quote
 Post subject:

我把从原rom里copy到cacko里的wlan-ng.conf修改了一下:

device "hostap_cs"
class "wlan-ng" module "hostap", "hostap_cs", "hostap_crypt_wep"

card "IEEE 802.11 Wireless LAN/CF Card"
manfid 0xd601, 0x0005
bind "hostap_cs"

改好后重启,再用dmesg命令,出现如下信息:
_SUSPEND
hostap_cs: CS_EVENT_RESET_PHYSICAL
pxa_pcmcia_suspend(0)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25220, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25220, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd42, len=6)
wlan0 (WE) : Buffer for request 8B1B too small (0<4)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25320, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25320, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd42, len=6)
wlan0 (WE) : Buffer for request 8B1B too small (0<4)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25420, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25420, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd42, len=6)
wlan0 (WE) : Buffer for request 8B1B too small (0<4)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25520, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25520, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd42, len=6)
wlan0 (WE) : Buffer for request 8B1B too small (0<4)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25620, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25620, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd42, len=6)
wlan0 (WE) : Buffer for request 8B1B too small (0<4)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25760, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25760, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd42, len=6)
wlan0 (WE) : Buffer for request 8B1B too small (0<4)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25860, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25860, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd42, len=6)
wlan0 (WE) : Buffer for request 8B1B too small (0<4)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25960, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25960, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd42, len=6)
wlan0 (WE) : Buffer for request 8B1B too small (0<4)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25a60, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25a60, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd42, len=6)
wlan0 (WE) : Buffer for request 8B1B too small (0<4)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25b60, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25b60, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd42, len=6)
wlan0 (WE) : Buffer for request 8B1B too small (0<4)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25c60, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25c60, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd42, len=6)
wlan0 (WE) : Buffer for request 8B1B too small (0<4)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25d60, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8888
wlan0: hfa384x_cmd: entry still in list? (entry=c3d25d60, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd42, len=6)
wlan0 (WE) : Buffer for request 8B1B too small (0<4)
Back to top
View user's profile Send private message
biphenyl



Joined: 18 Dec 2006
Posts: 23

小企鹅: 848

PostPosted: 2007-Jan-07 Sun, pm10:40 Reply with quote
 Post subject:

终于在cacko123下设置成功了!
以下是成功的经验:


把从原rom里copy到cacko里/etc/pcmcia下的wlan-ng.conf按如下方式修改了一下:

device "hostap_cs"
class "hostap" module "hostap", "hostap_cs", "hostap_crypt_wep"

card "IEEE 802.11 Wireless LAN/CF Card"
manfid 0xd601, 0x0005
bind "hostap_cs"


改好后重启系统,然后在Network里设置好就可以联网了!

iwconfig显示信息:
wifi0 IEEE 802.11b ESSID:"WL-500gP" Nickname:"zaurus"
Mode:Managed Frequency:2.457 GHz Access Point: 00:18:xx:xx:xx:xx
Bit Rate:11 Mb/s Sensitivity=1/3
Retry min limit:8 RTS thr:off Fragment thr:off
Encryption key: xxx Security mode:open
Power Management:off
Link Quality=63/70 Signal level=-18 dBm Noise level=-82 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

wlan0 IEEE 802.11b ESSID:"WL-500gP" Nickname:"zaurus"
Mode:Managed Frequency:2.457 GHz Access Point: 00:18:xx:xx:xx:xx
Bit Rate:11 Mb/s Sensitivity=1/3
Retry min limit:8 RTS thr:off Fragment thr:off
Encryption key:xxx Security mode:open
Power Management:off
Link Quality=63/70 Signal level=-18 dBm Noise level=-82 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

lsmod显示信息:
Module Size Used by
pxa_bi 24848 0 (unused)
net_fd 25248 0 (unused)
usbdcore 35504 0 [pxa_bi net_fd]
bluez 33216 0 (autoclean)
usbdmonitor 5488 0
usb-monitor 6496 0
hostap_crypt_wep 3616 1
hostap_cs 48064 2
hostap 98272 0 [hostap_crypt_wep hostap_cs]
sharp_mmcsd_m 41088 2
bvdd 11136 0 (unused)

dmesg显示信息:

hostap_crypt: registered algorithm 'NULL'
hostap_cs: 0.3.7 - 2005-02-12 (Jouni Malinen <jkmaline>)
hostap_crypt: registered algorithm 'WEP'
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
hostap_cs: setting Vcc=33 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0046, io.base=0x0000, len=64
hostap_cs: Registered netdevice wifi0
hostap_cs: index 0x01: Vcc 3.3, irq 135, io 0xf6000000-0xf600003f
prism2_hw_init: initialized in 220 ms
wifi0: NIC: id=0x800c v1.0.0
wifi0: PRI: id=0x15 v1.0.7
wifi0: STA: id=0x1f v1.3.6
wifi0: defaulting to host-based encryption as a workaround for firmware bug in Host AP mode WEP
wifi0: defaulting to bogus WDS frame as a workaround for firmware bug in Host AP mode WDS
wifi0: registered netdevice wlan0
prism2: wlan0: operating mode changed 3 -> 2
wifi0: LinkStatus=1 (Connected)
wifi0: LinkStatus: BSSID=00:18:xx:xx:xx:xx
set_wakeup_src=ae000019->ae000019[9801a003]
usbh: udc_connected: ACTIVE_LOW: 0<7>usbh: monitor_connected: 0
usbh: monitor_unload: 0
usbh: monitor_hotplug: agent: usbh interface: monitor action: unload
usbh: monitor_request_irq: 41 71
usbh: monitor_modinit: finished
usbdm: usbd_monitor 0.3 035 2002-06-12 20:00
monitor_connected: 1
monitor_load:
monitor_hotplug: agent: usbd interface: monitor action: load
usbh: udc_connected: ACTIVE_LOW: 0<7>usbh: monitor_connected: 0
usbh: monitor_unload: 4
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
net_fd 0.1 035 2002-06-12 20:00 (dbg="",alwaysup=0,OUT=64,IN=64)
vendorID: 4dd productID: 9031
pxa27x_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
udc_connect: usb-device is not active.
monitor_modinit: finished
wlan0 (WE) : Buffer for request 8B1B too small (0<Cool
BlueZ Core ver 2.4 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk>
monitor_hotplug: agent: usbd interface: monitor action: suspend
udc_disable: ep0_urb already NULL
udc_disable: ep0_urb already NULL
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 exiting
monitor_pm_event: suspend finished (rc=0)
usbh: monitor_hotplug: agent: usbh interface: monitor action: suspend
usbh: monitor_pm_event: suspend finished (rc=0)
pxa_sd_wait_response: responce time out (cmd=07 MMC_STAT=0x2142)
hostap_cs: CS_EVENT_PM_SUSPEND
hostap_cs: CS_EVENT_RESET_PHYSICAL
pxa_pcmcia_suspend(0)
sharp_sl_nand_suspend
jack=0
resume virtual_wakeup_factor=00000001 (src=9801a003)
resume logical_wakeup_factor=00000001 (src=ae000019)
FCS : CCCR = 2000210
sharp_sl_nand_resume
pxa_pcmcia_init(0)
hostap_cs: CS_EVENT_PM_RESUME
hostap_cs: CS_EVENT_CARD_RESET
prism2_hw_init: initialized in 290 ms
pxa_pcmcia_init(1)
pxa_sd_wait_response: responce time out (cmd=52 MMC_STAT=0x2142)
pxa_sd_wait_response: responce time out (cmd=05 MMC_STAT=0x2142)
[SD]-clustsize = 10000
new hp status=0
usbh: hotplug_schedule_bh: schedule bh
hotplug_schedule_bh: schedule bh
usbh: hotplug_bh:
usbh: udc_connected: ACTIVE_LOW: 0<7>usbh: monitor_connected: 0
usbh: monitor_restore: RESTORE_UNLOADED
usbh: monitor_hotplug: agent: usbh interface: monitor action: restore-unloaded
hotplug_bh:
monitor_connected: 1
monitor_restore: RESTORE_LOADED
monitor_hotplug: agent: usbd interface: monitor action: restore-loaded
wifi0: LinkStatus=1 (Connected)
wifi0: LinkStatus: BSSID=00:18:f3:29:17:28
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
net_fd 0.1 035 2002-06-12 20:00 (dbg="",alwaysup=0,OUT=64,IN=64)
vendorID: 4dd productID: 9031
pxa27x_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
udc_connect: usb-device is not active.



wlan-ng.rar
 Description:
修改好的wlan-ng.conf文件

Download
 Filename:  wlan-ng.rar
 Filesize:  192 Bytes
 Downloaded:  54 Time(s)



Last edited by biphenyl on 2007-Jan-07 Sun, pm10:48; edited 1 time in total
Back to top
View user's profile Send private message
biphenyl



Joined: 18 Dec 2006
Posts: 23

小企鹅: 848

PostPosted: 2007-Jan-07 Sun, pm10:44 Reply with quote
 Post subject:

最后我要特别感谢ccpaging的热情帮助!!!
Back to top
View user's profile Send private message
wterlan



Joined: 21 Feb 2006
Posts: 67

小企鹅: 560

PostPosted: 2007-Jan-12 Fri, pm1:13 Reply with quote
 Post subject:

ccpaging真是个非常的热情的XD,上次我在群里问了他关于CFWIFI的事,结果他抱病作答,我都很不好意思了,借此感谢ccpaging兄!!!
Back to top
View user's profile Send private message
Display posts from previous:     
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    Zaurus 中文论坛 Forum Index » CACKO & SHARP/金峰 & OZ All times are GMT + 8 Hours
Page 1 of 1

 
Jump to:   
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum

[ 页面生成时间: 秒 ] :: [ 次查询 ] :: [ ]
Powered by phpBB © 2001, 2002 phpBB Group
iCGstation v1.0 Template By Ray © 2003, 2004 iOptional